CLEAPSS DT - Supporting practical work in science, technology and art


Searching entire Technology Site for Box
1 234
Showing results 1 to 4 of 35..

MRAT - 1.051 - Motor Vehicle Engineering: Lifting and Holding Equipment
MRATsProjects
It is often necessary to have access to the underside of vehicles or all-round assemblies such as engines, gear-boxes, etc. All of these are heavy so hoists, jacks, cranes and lifts are needed.
more..
CLEAPSS DT Logo
Matched: Box
View Resource
MRAT - 1.068 - Surface Finishes: Solvent-Based Paints (Aerosol)
MRATsProjects
Many different paints are available in cans to be applied as aerosols. These finishes are very convenient for objects small enough to be placed in a large cardboard box (on its side) to contain the over-spray.Zinc-rich primers often contain toluene in the solvent mixture, others contain up to 35% of xylene. Possible other constituents include MEK, acetone, alcohols and less-hazardous components. The propellant is usually butane.
more..
CLEAPSS DT Logo
Matched: Box
View Resource
Lighting using MDF base
Projects

This project has the pupils building a small MDF box to contain a lighting circuit that is a base for a table lamp or lighting display piece.

The MRATs and other documents below are related to the construction of the box and building the electrical circuit.

more..
Using light from base to illuminate acrylic
Matched: Box
View Resource
Wooden Boxes
Projects

The resources below have been selected as those needed that cover the activities a pupil would carry out in making a wooden box.

Typically they will measure and mark out materials, cut materials using saws, sand pieces to size, glue pieces together and finish the wood using appropriate finishes.

more..
Boxes constructed using hand tools
Matched: Box
View Resource